NSN 9540-00-001-5119

Part Details | STRUCTURAL BEAM

9540-00-001-5119 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.

Alternate Parts: QQA20011, QQ-A-200/11, QQA20011, QQ-A-200/11, LS33758, LS337581, LS33758-1, AMSQQA20011, AMS-QQ-A-200/11, 9540-00-001-5119, 00-001-5119, 9540000015119, 000015119

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
95SEP 29, 197200-001-511937018 ( BEAM, STRUCTURAL )
REFERENCE DRAWINGS & PICTURES

T SHAPE

BEAM,STRUCTURAL | 9540-00-001-5119, 000015119

SQUARE END

BEAM,STRUCTURAL | 9540-00-001-5119, 000015119

SQUARE END

BEAM,STRUCTURAL | 9540-00-001-5119, 000015119

SQUARE END

BEAM,STRUCTURAL | 9540-00-001-5119, 000015119

SQUARE END

BEAM,STRUCTURAL | 9540-00-001-5119, 000015119
Cross Reference | NSN 9540-00-001-5119
Part Number Cage Code Manufacturer
QQ-A-200/1171176EMERSON ELECTRIC COBROWNING MFG DIV
QQ-A-200/1181348FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES
LS3375898897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
LS33758-198897LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
Technical Data | NSN 9540-00-001-5119
Characteristic Specifications
FABRICATION METHOD EXTRUDED
HEAT TREATMENT T-6511 SOLUTION HEAT TREATED
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
BASIC SHAPE STYLE T SHAPE
OVERALL HEIGHT1.850 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.213 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.213 INCHES NOMINAL
LEG THICKNESS0.288 INCHES NOMINAL
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES3.646 INCHES NOMINAL
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES3.654 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
TOP FLANGE WIDTH7.300 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
FIRST TIP STYLE SQUARE END
SECOND TIP RELATIONSHIP TO FIRST TIP IDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS IDENTICAL W/FIRST TIP
WEIGHT PER UNIT MEASURE2.439 POUNDS PER LINEAR FOOT
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND T6511 TEMPER
USAGE DESIGN STRUCTURAL