NSN 5915-00-054-3045
Part Details | RADIO FREQUENCY INTERFERENCE FILTER
5915-00-054-3045 An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
Alternate Parts: 61621663, 6162-166-3, RF2220A, RF02220A, 61621663, 6162-166-3, 61621663, 6162-166-3, 5915-00-054-3045, 00-054-3045, 5915000543045, 000543045
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | MAY 24, 1968 | 00-054-3045 | 00765 ( FILTER, RADIO FREQUENCY INTERFERENCE ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE
Cross Reference | NSN 5915-00-054-3045
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6162-166-3 | 80294 | BOURNS INSTRUMENTS INC |
| RF2220A | 13619 | EMS DEVELOPMENT CORPORATION |
| RF02220A | 13619 | EMS DEVELOPMENT CORPORATION |
| 6162-166-3 | 13619 | EMS DEVELOPMENT CORPORATION |
| 6162-166-3 | 11871 | RECON/OPTICAL, INC. |
Technical Data | NSN 5915-00-054-3045
| Characteristic | Specifications |
|---|---|
| SOURCE IMPEDANCE RATING PER FUNCTION | ZZ50.0 OHMS |
| LOAD IMPEDANCE PER FUNCTION | ZZ50.0 OHMS |
| OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | CZZ100.0 VOLTS |
| OPERATING CURRENT RATING PER FUNCTION IN AMPS | 7.0 BLANK |
| INCLOSURE TYPE | HERMETICALLY SEALED |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
| OVERALL HEIGHT | 1.250 INCHES NOMINAL |
| BODY LENGTH | 1.750 INCHES NOMINAL |
| BODY HEIGHT | 1.000 INCHES NOMINAL |
| BODY WIDTH | 1.250 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED STUD |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.250 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| NOMINAL THREAD SIZE | 0.138 INCHES |
| TEST DATA DOCUMENT | 11871-6162-166-3 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | ZZ INDUCTANCE-CAPACITANCE |
| AVERAGE LIFE RATING IN HOURS | 1000.0 |
| OPERATING TEMP RANGE | -55.0 TO +85.0 DEG CELSIUS |