NSN 3040-00-024-5960
Part Details | SHOULDERED SHAFT
3040-00-024-5960 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 192422, 3040-00-024-5960, 00-024-5960, 3040000245960, 000245960
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-024-5960 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
TONGUE
TAPERED WITH FLAT
TONGUE
Cross Reference | NSN 3040-00-024-5960
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 192422 | 06848 | HONEYWELL INTERNATIONAL INC.DBA HONEYWELL |
Technical Data | NSN 3040-00-024-5960
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 5 TAPERED WITH FLAT |
| MATERIAL | STEEL CORROSION RESISTING |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-5610 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 40.0 MICROINCHES |
| FIRST END DIAMETER | 0.3059 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.0740 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.208 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.594 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TONGUE |
| SECOND END GROOVE DIAMETER | 0.2810 INCHES MINIMUM AND 0.2850 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.3744 INCHES MINIMUM AND 0.3747 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 1.062 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3500 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.3740 INCHES NOMINAL |
| SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.562 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 36 |
| LARGEST STEP DIAMETER | 0.497 INCHES MINIMUM AND 0.498 INCHES MAXIMUM |
| OVERALL LENGTH | 8.4060 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | SPLINED SHOULDER 0.250 IN. W,1.688 IN. FROM THREADED END |
| END ITEM IDENTIFICATION | PART OF PRESSURIZING AND CUTOFF BODY GP FOR MAIN FUEL CONTROL,AJ-A2,J57 AIRCRAFT |