NSN 2920-00-752-4474
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-752-4474 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 118895, 837G1, 1117486, 1117486, 1117486, 1117486, 1117486, 914671, 7524474, 7374864, 2920-00-752-4474, 00-752-4474, 2920007524474, 007524474
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1962 | 00-752-4474 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-752-4474
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 118895 | 34623 | AM GENERAL LLC |
| 837G1 | 56442 | DIAMOND REO TRUCK CO |
| 1117486 | 24617 | GENERAL MOTORS CORP |
| 1117486 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1117486 | 7X677 | GENERAL MOTORS LLCDBA GENERAL MOTORS |
| 1117486 | 23862 | MILITARY VEHICLES OPNGENERAL MOTORS TRUCK AND BUS GROUP |
| 1117486 | 1LW55 | REMY, INC. |
| 914671 | 58275 | SASCO INC CANADIAN DIV |
| 7524474 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
| 7374864 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2920-00-752-4474
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 24.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 25.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1750 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1700 |
| GROUNDING METHOD | INTERNAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.257 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.118 INCHES MINIMUM AND 8.132 INCHES MAXIMUM |
| BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 21.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 201.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.812 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.669 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.219 INCHES NOMINAL |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.500 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | SUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |