NSN 2920-00-706-8169
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-706-8169 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 693021, TA12N400, TA12N400, TA12N400, 41473, 2920-00-706-8169, 00-706-8169, 2920007068169, 007068169
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | FEB 07, 1968 | 00-706-8169 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-706-8169
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 693021 | 11083 | CATERPILLAR INC.DBA CATERPILLAR |
| TA12N400 | 1VPW8 | GENERAL DYNAMICS MISSION SYSTEMS,INC |
| TA12N400 | 31211 | MOTOROLA AUTOMOTIVE ELECTRONICS |
| TA12N400 | 94990 | MOTOROLA INC.DBA INTEGRATED INFORMATION SYSTEMS |
| 41473 | 13841 | TIFFIN PARTS, L.L.C.DIV SUBSIDIARY OF PETTIBONE CORP. |
Technical Data | NSN 2920-00-706-8169
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 12.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 30.0 |
| GROUNDING METHOD | INTERNAL |
| GROUND POLARITY TYPE | NEGATIVE |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| MOUNTING STYLE | 9 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| PILOT DIAMETER | 2.250 INCHES NOMINAL |
| PILOT HEIGHT | 0.400 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.437 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.327 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.385 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.490 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.630 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 0.585 INCHES NOMINAL |
| KEYWAY LENGTH | 0.562 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.750 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |