NSN 2920-00-640-7467
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-640-7467 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 1101667, 1101667, 1101667, 1101667, 2920-00-640-7467, 00-640-7467, 2920006407467, 006407467
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-640-7467 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
FLANGE MTD W/THREE MTG HOLES
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-640-7467
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1101667 | 24617 | GENERAL MOTORS CORP |
| 1101667 | 61928 | GENERAL MOTORS CORPAC-DELCO DIV |
| 1101667 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1101667 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-640-7467
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 6.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 12.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1600 |
| GROUNDING METHOD | EXTERNAL |
| GROUND POLARITY TYPE | B$C |
| SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| MOUNTING STYLE | FLANGE MTD W/THREE MTG HOLES |
| PILOT DIAMETER | 3.247 INCHES MINIMUM AND 3.249 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 3.625 INCHES NOMINAL |
| PILOT HEIGHT | 0.250 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| TOP MOUNTING HOLE DIAMETER | 0.625 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.438 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 5.875 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.688 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.7495 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.312 INCHES NOMINAL |
| KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.297 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| FURNISHED ITEMS | OIL DEFLECTOR AND VOLTAGE REGULATOR AND WOODRUFF KEY |
| FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |