NSN 2920-00-555-2205
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-555-2205 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: A0015454GN, A0015454GN, 5454GN, 3317406, 2920-00-555-2205, 00-555-2205, 2920005552205, 005552205
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-555-2205 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
TAPERED SHAFT END, THREADED W/KEYWAY
Cross Reference | NSN 2920-00-555-2205
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A0015454GN | 84250 | AUTOMOTIVE IGNITION INC |
| A0015454GN | 35510 | PRESTOLITE ELECTRIC INC |
| 5454GN | 35510 | PRESTOLITE ELECTRIC INC |
| 3317406 | 24975 | PRESTOLITE ELECTRIC INCORPORATEDDBA PRESTOLITE ELECTRIC |
Technical Data | NSN 2920-00-555-2205
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 28.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 70.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1050 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 550 |
| RECTIFIER LOCATION | SEPARATE |
| SHAFT ROTATION DIRECTION | B$C |
| DISTANCE FROM RAISED FACE TO FIRST MOUNTING HOLE CENTER | 2.906 INCHES NOMINAL |
| DISTANCE FROM RAISED FACE TO SECOND MOUNTING CENTER | 8.406 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 90.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 90.0 |
| ANGULAR DEVIATION OF THIRD HOLE FROM SECOND HOLE IN DEG | 90.0 |
| ANGULAR DEVIATION OF FOURTH HOLE FROM THIRD HOLE IN DEG | 90.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 13 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | TAPERED SHAFT END, THREADED W/KEYWAY |
| THREAD LENGTH | 0.781 INCHES NOMINAL |
| TAPER LENGTH | 1.344 INCHES NOMINAL |
| KEYWAY WIDTH | 0.250 INCHES NOMINAL |
| KEYWAY LENGTH | 1.000 INCHES NOMINAL |
| LARGEST DIAMETER | 1.125 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.469 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.750 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 16 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| FURNISHED ITEMS | COOLING FAN AND DRIVE PULLEY AND WOODRUFF KEY |