NSN 2920-00-302-6499
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-302-6499 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 1117478, MS138041, MS13804-1, MILG12604, MS138041, MS13804-1, GKG4802ST, GKG4802ST, 2920-00-302-6499, 00-302-6499, 2920003026499, 003026499
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-302-6499 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
SPLINED SHAFT END, THREADED
Cross Reference | NSN 2920-00-302-6499
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1117478 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| MS13804-1 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| MILG12604 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MS13804-1 | 96906 | MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS |
| GKG4802ST | 68505 | PRESTOLITE ELECTRIC INC |
| GKG4802ST | 24975 | PRESTOLITE ELECTRIC INCORPORATEDDBA PRESTOLITE ELECTRIC |
Technical Data | NSN 2920-00-302-6499
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 28.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 40.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1875 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1490 |
| GROUNDING METHOD | INTERNAL |
| GROUND POLARITY TYPE | NEGATIVE |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.430 INCHES MINIMUM AND 4.450 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.430 INCHES MINIMUM AND 4.450 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.521 INCHES MINIMUM AND 7.538 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.381 INCHES MINIMUM AND 8.598 INCHES MAXIMUM |
| BOTTOM MOUNTING HOLE DIAMETER | 0.525 INCHES MINIMUM AND 0.537 INCHES MAXIMUM |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 160.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | SPLINED SHAFT END, THREADED |
| THREAD LENGTH | 0.680 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.7225 INCHES MINIMUM AND 0.7335 INCHES MAXIMUM |
| SPLINE MAJOR DIAMETER | 0.8586 INCHES MINIMUM AND 0.8636 INCHES MAXIMUM |
| SPLINE WIDTH | 0.097 INCHES MINIMUM AND 0.0982 INCHES MAXIMUM |
| SPLINE LENGTH | 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM |
| SPLINE QUANTITY | 13 |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND FUNGUS RESISTANT |
| FURNISHED ITEMS | RADIO INTERFERENCE SHIELDING |
| NONDEFINITIVE SPEC/STD DATA | B CLASS AND 2 GRADE AND B GROUP |
| FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |