NSN 9540-01-509-2562
Part Details | STRUCTURAL BEAM
9540-01-509-2562 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: K40A11T3511, 9540-01-509-2562, 01-509-2562, 9540015092562, 015092562
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JUN 17, 2003 | 01-509-2562 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
Cross Reference | NSN 9540-01-509-2562
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| K40A11T3511 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
Technical Data | NSN 9540-01-509-2562
| Characteristic | Specifications |
|---|---|
| MATERIAL | ALUMINUM ALLOY 2024 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200 TO 3 FED SPEC 1ST MATERIAL RESPONSE |
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | STRESS RELIEVED BY STRETCHING AND T-3511 SOLUTION HEAT TREATED |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 1.250 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.051 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.051 INCHES NOMINAL |
| LEG THICKNESS | 0.051 INCHES NOMINAL |
| TOP FLANGE WIDTH | 1.750 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 0.094 RADIANS NOMINAL |
| RIGHT TOP INSIDE ANGLE | 0.094 RADIANS NOMINAL |
| FIRST TIP STYLE | UPPER RADIUS |
| FIRST TIP RADIUS | 0.016 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | LOWER RADIUS |
| THIRD TIP RADIUS | 0.016 INCHES NOMINAL |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/THIRD TIP |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | ALUMINUM ALLOY TEES, 90 DEG SYM, ALL THICKNESSES EQUAL, EXTRUDED |