NSN 6105-00-538-9835
Part Details | CONTROL MOTOR
6105-00-538-9835 A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also SERVOMOTOR, AUTOMATIC PILOT.
Alternate Parts: 949346, 6105-00-538-9835, 00-538-9835, 6105005389835, 005389835
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 61 | JAN 01, 1963 | 00-538-9835 | 19258 ( MOTOR, CONTROL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 6105-00-538-9835
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 949346 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 6105-00-538-9835
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 2.180 INCHES |
| OVERALL WIDTH | 1.437 INCHES |
| MOUNTING METHOD | CLAMP RING |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT RATING METHOD | NO LOAD |
| TORQUE RATING AND TYPE | 0.16 INCH-OUNCES STALLED |
| TEMP RATING | 45.0 AMBIENT DEG CELSIUS AND 50.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NONVENTILATED |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 115.0 AC |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.080 |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 500.0 |
| CONTROL FIELD WINDING TYPE | TWO WINDINGS, PARALLEL CONNECTED |
| ROTOR SPEED RATING IN RPM | 6000.0 SINGLE NO LOAD |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 10001-949346 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |