NSN 2920-00-605-0736
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-605-0736 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: GRC2418A204, GRC2418C204, 8H1957, GRC2418A204, GRC2418C204, 2920-00-605-0736, 00-605-0736, 2920006050736, 006050736
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-605-0736 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-605-0736
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GRC2418A204 | 01843 | AMBAC INTERNATIONAL CORPORATIONDIV AMBAC INTERNATIONAL |
| GRC2418C204 | 01843 | AMBAC INTERNATIONAL CORPORATIONDIV AMBAC INTERNATIONAL |
| 8H1957 | 11083 | CATERPILLAR INC.DBA CATERPILLAR |
| GRC2418A204 | 24956 | UNITED TECHNOLOGIES CORPELECTRO SYSTEMS INC |
| GRC2418C204 | 24956 | UNITED TECHNOLOGIES CORPELECTRO SYSTEMS INC |
Technical Data | NSN 2920-00-605-0736
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 24.0 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1350 |
| GROUND POLARITY TYPE | B$C |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE |
| PILOT DIAMETER | 3.247 INCHES MINIMUM AND 3.249 INCHES MAXIMUM |
| SLOT WIDTH | 0.656 INCHES NOMINAL |
| SLOT LENGTH | 1.219 INCHES NOMINAL |
| PILOT HEIGHT | 0.844 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS | 3.625 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.484 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 5.875 INCHES NOMINAL |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.781 INCHES NOMINAL |
| FIRST STEP DIAMETER | 0.750 INCHES NOMINAL |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.250 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |