NSN 2920-00-134-4652
Part Details | ENGINE ACCESSORY GENERATOR
2920-00-134-4652 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 11664476, 2920-00-134-4652, 00-134-4652, 2920001344652, 001344652
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JUL 03, 1969 | 00-134-4652 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-134-4652
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11664476 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2920-00-134-4652
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 28.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 60.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 10000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 2500 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 600 |
| RECTIFIER LOCATION | INTEGRAL |
| GROUNDING METHOD | EXTERNAL |
| GROUND POLARITY TYPE | NEGATIVE |
| SHAFT ROTATION DIRECTION | B$C |
| MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 4.182 INCHES MINIMUM AND 4.192 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 4.182 INCHES MINIMUM AND 4.192 INCHES MAXIMUM |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.243 INCHES MINIMUM AND 7.256 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 8.123 INCHES MINIMUM AND 8.136 INCHES MAXIMUM |
| BOTTOM MOUNTING HOLE DIAMETER | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 160.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 200.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.113 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.668 INCHES MINIMUM AND 0.669 INCHES MAXIMUM |
| KEYWAY WIDTH | 0.126 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| UNTHREADED PORTION LENGTH | 1.310 INCHES NOMINAL |
| KEYWAY LENGTH | 1.305 INCHES MINIMUM AND 1.325 INCHES MAXIMUM |
| DISTANCE FROM END TO KEYWAY CENTER | 1.349 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | SUBMERSIBLE |