NSN 3040-00-051-1298
Part Details | SHOULDERED SHAFT
3040-00-051-1298 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 114C2730, 3040-00-051-1298, 00-051-1298, 3040000511298, 000511298
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 11, 1967 | 00-051-1298 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-051-1298
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 114C2730 | 05606 | GENERAL DYNAMICS-OTS, INC.DBA GD-OTS (WILLISTON) |
Technical Data | NSN 3040-00-051-1298
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 250.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0390 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.4700 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.151 INCHES NOMINAL |
| FIRST END DIAMETER | 0.4995 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.5000 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.360 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.760 INCHES NOMINAL |
| OVERALL LENGTH | 6.120 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | FLATTED ON ONE SIDE FROM THREADED END 0.36 IN. LG; GROOVED 0.08 IN. LG ON SECOND END 0.36 IN. FROM EDGE |
| END ITEM IDENTIFICATION | PART OF AMMUNITION DRUM,ENTRANCE UNIT,P/N 209F439,NSN 1005-01-050-2736; USED ON F-16 A AND B FIGHTER AIRCRAFT |
| FSC APPLICATION DATA | GUN COMPONENT |